To order a custom linear drain, measure the length and width of the finished opening in centimeters, and tell us where the outlet goes and which floor finish will be used. With this information, Art Ralos prepares a quote for a drain sized to your project. This guide shows what to measure for each piece and what to send with it.
Why order a custom linear drain
An 87 cm shower, a balcony with a 3 m channel or a pool edge with corners need pieces that a standard catalog does not cover. Art Ralos makes its drains and access covers to measure for your project. The result is a piece that fits the opening with no improvised joints and no floor cuts to make up for a size difference.
Even so, it helps to know the standard sizes. They help you choose the model and, when they fit, they make the order simpler.
How to measure the drain opening
Measure the opening the way it will be at installation time.
- Write everything down in centimeters.
- Measure the length and width at more than one point. If the measurements change from one point to another, send all of them.
- If the piece takes a floor finish on top, state the finish and its thickness.
- Mark where the drain pipe connection is.
For a renovation, take photos of the area. Photos remove any doubt about floor level, walls and the outlet position.
Linear shower drain sizes
Bathroom linear drains go from 50 to 120 cm long. The Tile-Insert Linear Drain, the Perforated Linear Drain and the Solid Stainless Linear Drain need an opening 6 cm wide and come in 10 cm steps. The Slim Linear Drain needs 3 cm and also comes in 10 cm steps. The Basic Aluminum Linear Drain needs 7 cm.
Outside these sizes, the drain is made to measure for your project. The Slim is made to measure above 120 cm and goes up to 150 cm.
Outlet, flange and finish
Also tell us:
- The outlet. The 6 cm drains have five positions: center or side, facing down or sideways, or at the end of the channel. On the Slim, the outlet is central or at the side. For the Basic, tell us where the drain pipe connection is.
- The version with or without a flange. The flange goes under the floor finish.
- The finish: the grate pattern on the Perforated, brushed stainless or matte black on the Solid Stainless, the Basic color (light gray, black or brown) or the tile that goes on the Tile-Insert.
Outdoor and pool linear drain sizes
On balconies, gourmet areas and around the pool, the Outdoor Perforated Channel Drain and the Outdoor Tile-Insert Channel Drain come in widths of 6, 10, 15 or 20 cm. Tell us the width, the total length and where the connection to the drain line is. On outdoor drains, custom lengths go up to 200 cm per piece, and production confirms the limit of each model in the quote.
For the pool edge, the Pool Deck Drain has a standard size of 100 x 11 cm. It sits on the deck, right behind the coping stone, in a masonry channel 7.5 cm wide and at least 5 cm deep. Send a drawing of the pool edge with the corner positions. The drain runs in straight sections and turns at 90 degree angles.
If the channel is curved, the Flexnox Flexible Pool Drain follows straight and curved lines, at 100 x 15 cm.
Pool equipment access cover sizes
Pool equipment access covers go from 50 x 50 cm to 120 x 120 cm, in 10 cm steps. The Plain Access Cover goes from 60 x 60 cm to 100 x 100 cm. Other sizes are made to measure for your project. Tell us whether you measured the clear masonry opening or the cutout in the floor.
Then tell us:
- The floor. Tile-insert covers have a 13 mm recess to take the floor finish.
- The drainage. Covers with a gutter have a 9 cm gutter and a 50 mm outlet. Tell us where the connection point is.
- The opening. State the hinge side and the free space to open it. From 100 x 100 cm, the cover has a gas strut and a double handle.
- The color, for covers that stay visible.
For a renovation, the Surface-Mounted Access Cover rests its wide flange on the existing floor and sits 3 to 4 cm above it. Send photos of the current opening and the outside and inside measurements of the opening. Where cars drive over, the Vehicle-Rated Access Cover goes from 60 x 60 cm to 100 x 100 cm; tell us where it goes and what kind of vehicle drives over it.
Transition profile and recessed skirting sizes
The Transition Profile comes in 100 cm bars, in the J, L, P, T and U models. Tell us the model and the total length.
The Recessed Skirting comes in 100 x 5 cm or 100 x 10 cm, with or without LED. It is installed during construction, before the wall finish, so place the order before that stage.
What to send with a custom order
- The product and the model.
- The length and width of the opening, in centimeters.
- The position of the outlet and of the connection to the drain line.
- The finish that goes on the piece and its thickness.
- Photos of the area, especially for a renovation.
- The delivery city.
For a linear drain, use the custom quote. For other pieces, use the quote button on the product page. Anything without its own field goes in the message. The size guide lists the sizes of each product.
Frequently asked questions
What is the standard size of a linear drain?
For the bathroom, 50 to 120 cm long. The Tile-Insert, the Perforated and the Solid Stainless are 6 cm wide, the Slim is 3 cm and the Basic is 7 cm. Outdoor drains are 6, 10, 15 or 20 cm wide.
Can a linear drain be made to measure?
Yes. Drains and access covers can be made to measure for your project. Only the Prefabricated Equipment Room and the Protective Box for Pool Cover Reel come in fixed sizes.
Is a custom linear drain made of stainless steel?
The Tile-Insert, Perforated and Solid Stainless linear drains are made of 304 stainless steel, base included, in custom sizes too. The Basic is made of painted aluminum.
Do I need to measure after the floor is laid?
Measure the opening as it will be at installation. If the floor is not laid yet, state the floor finish and its thickness in the order.
How do I order a custom drain?
Use the custom quote on the website or talk to Art Ralos on WhatsApp. Send the opening measurements, the outlet position, the floor finish and photos of the area.
Request a quote for your custom drain
Enter the measurements in the custom quote or message Art Ralos on WhatsApp +55 (34) 99293-8012. You can also send photos and project drawings through the contact page.
Found it useful? Send it to someone planning a renovation:
Send on WhatsApp

