Skip to content
Request a quote

Products / Pool

Surface-Mounted Access Cover

Wide flange over the existing floor.

Aluminum · made to measure

About the product

Surface-mounted aluminum cover with a hinged opening and a wide flange for installation on the existing floor.

Tampa Casa de Máquina de Sobrepor Bege instalado no ambiente
  • Over the existing floorThe wide flange rests the cover over the opening, without recessing it.
  • Plain or non-slipTop in gray, black, brown and beige.
  • Piston to openHandle on the edge and double handles on the larger versions.
  • 2 mm aluminumReinforced, suited to light traffic.

The Art Ralos surface-mounted cover gives access to the pump house without building the structure into the existing floor. Its wide flange rests the piece over the opening, an alternative for renovations and for places that already have an access to the compartment.

Made of reinforced 2 mm aluminum, the cover has a hinged opening and a handle on the edge. The piston helps it open, and larger versions have twin handles. The set lets you reach the pump house equipment when needed, without removing the whole piece.

The top can be plain or non-slip, depending on the option chosen. Finishes come in gray, black, brown and beige, to match the piece to the area around it. As a surface-mounted cover, its top stays on view and does not take a floor finish. It sits a few centimeters above the floor, which must be considered when choosing the spot.

To install it, the flange rests on the floor and the structure is fixed with PU, wall plugs and screws. The piece comes without holes, and the fixings are not included. Plan the fixing to suit the existing opening, keeping the space needed to move the cover and reach the compartment.

Meant for light traffic, the cover can be used on pump house access, including by the pool. Its aluminum build and the chosen finish leave the access marked and tidy, with an easy opening for maintenance visits. Before installing, consider the position of the handle and the space around it so the hinged lid can be lifted.

Gallery

Surface-Mounted Access Cover

Surface-Mounted Access Cover in the room

1 of 9
Surface-Mounted Access Cover in the room
Surface-Mounted Access Cover in the room

1 of 9

Configure your product

Request a quote

Technical measurements

Surface-Mounted Access Cover, from 50 x 50 to 120 x 120 cm.

L = 500 a 120050
L = 500 a 120050
Front view in section, with sizes in millimeters.
  • 50 to 120 cmCover size with the flanges, or made to measure
  • L − 50 mmClear opening
  • 50 mmTotal height
  • 2 mm aluminiumSmooth or non-slip top, in black, grey, brown or beige

The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.

Download the files

Fill in once and download every file of the Surface-Mounted Access Cover.

You are

We use your details only to talk about your project.

Technical sheet

Send the size of the opening with the quote request. The sizes below are the most requested.

  • AluminumMaterial
  • Made to measureMade to the size of the opening

Reference sizes

50x50 to 120x120 cm, in 10 cm steps

Where to use

  • Pool pump house
  • Renovating an existing opening

Areas

Request a quote

Send the size of the opening or the project. We answer with material, lead time and terms.

Request on WhatsApp

Or write to vendas@artralos.com.br