Ralo Linear Perfurado
Perforated stainless grate, removable for cleaning.
From 50 to 120 cm, in 10 cm steps, 6 or 10 cm wide, or made to measure.
Perforated linear drain for bathrooms
The Art Ralos perforated linear drain for bathrooms brings together a channel and a finish with cutouts that drain the water inside the shower. The stainless surface shows on the floor and comes in different patterns to match the bathroom tiles.

The water flows through the cutouts of the finish into the channel. Made of 304 stainless steel, the drain is meant for indoor installation. The patterns are laser cut and come in Bubble, Flat, Flower, Grid and Square.
Each pattern has its own layout of openings. This range lets you choose the look of the visible part to suit the other finishes of the room. Every pattern also comes in black, besides the stainless finish, for those who prefer a dark composition on the floor.
There are versions with and without a flange. When present, the flange sits under the floor finish after installation. There are also five outlet options to fit the channel connection to the bathroom plan. The outlet position must be decided before closing the floor.
The channel is built into the shower before the floor finish goes down. It can be installed parallel to the wall or to the glass, depending on the layout. The top sits flush with the floor, which must slope toward the drain to lead the water to the cutouts.
For a build or a renovation, decide the pattern and the version with or without flange together with the shower finish. This way the visible part of the drain is part of the choice of materials, while the channel is built into the planned bathroom installation.
Gallery
Flat grate
In stainless steel, also available in black
In the room
Product photo
Build your drain
Choose the pattern, the finish, the length, the width and the outlet. The 3D drain changes with every choice.
Preparing the 3D drain
Drag to rotate
Grate pattern
Finish
Length
Width
Channel
Water outlet
Ralo Linear Perfurado Flat, stainless, 70 x 6 cm, without flange, outlet center, downward.
Request this drainTechnical measurements
Ralo Linear Perfurado, 6 cm channel, without flange.
- 50 to 120 cmLength, or made to measure
- 6 cmOpening in the floor for the channel
- 78 mmFlanged channel width, from flange to flange
- 52 mmChannel width, from wall to wall
- 48 mmGrate width
- 30 mmChannel height
- 27 mmGrate height
- 55 mmTotal height, with the outlet
- 28.4 and 38 mmOutlet diameter: downward and sideways
- 5Outlet positions: center, side or end
- With or without flangeThe flange, when present, sits under the floor
- 304 stainless steelChannel and grate
- RemovableThe grate lifts out for cleaning
The sheet has the three views, the five outlets and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.
Files for your project
Drawings and manual for the project and the job crew. The first time, we ask for your details. After that, the files download directly.
Frequently asked questions
How wide is the opening in the floor?
For the 6 cm drain, the opening is 6 cm wide. The channel goes into it and is set with PU, with the outlet connected to the pipe. For the 10 cm drain, the seller confirms the opening size.
When is the drain installed?
Before the floor and wall finish. The flanges sit under the finish, which helps against leaks and gives a thinner edge.
Can it be made in another size?
Yes. The length goes from 50 to 120 cm, in 10 cm steps, and the width is 6 or 10 cm. Outside that, the piece is made to measure.
Which outlet should I choose?
It depends on where the pipe runs. The outlet can be in the center or on the side, downward or sideways, or at the end of the channel.
How do I clean the drain?
Lift the grate, remove what got caught and put the grate back.
Other linear drains for bathrooms
See all productsRequest a quote
Send the size of the opening or the project. We answer with material, lead time and terms.
Request on WhatsAppOr write to vendas@artralos.com.br





