

Tile-Insert Access Cover with Flange
Takes the floor and has a gutter for the water.
Simple pump house cover in 2 mm aluminum checker plate, with a frame and a screw-in handle.

The simple pump house cover closes the access to the equipment with a removable piece resting on a frame. It is an option for pump houses and other technical spaces where you need to lift the cover off to reach the inside.
The set is made of 2 mm aluminum checker plate and comes in matte black, graphite, corten or beige. The raised surface gives grip for foot traffic. A powder coat completes the finish.
The model is made of the cover and the support frame. It has no hinge or piston: to open it, screw in the handle and lift the piece. Once removed, it leaves the opening clear to reach pumps, filters and pipes during inspections and maintenance.
The cover can be used on pump pits, cisterns and inspection accesses. For pump houses that need ventilation, the space must have its own, as this version has no built-in vent. Check what the equipment needs before choosing the cover.
On installation, the frame is set in concrete in the floor and the cover rests inside it, level with the surrounding floor. The set has no collecting gutter, so the drainage conditions on site must be considered when planning the build.
To reach the technical area, lift the cover by the screw-in handle and, after the work, put it back on the frame. The checker finish stays on view on the floor, unlike the models that take a floor finish. Art Ralos offers this setup for those who want a removable cover with a support frame and direct access to the opening.
Simple Access Cover in the room
Simple Access Cover, from 60 x 60 to 100 x 100 cm.
The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.
Send the size of the opening with the quote request. The sizes below are the most requested.
60x60 to 100x100 cm, in 10 cm steps


Takes the floor and has a gutter for the water.


Takes the floor, with a hinged opening.


Floor in the center and a vented edge.


Aluminum checker plate with a hidden handle.
Send the size of the opening or the project. We answer with material, lead time and terms.
Request on WhatsAppOr write to vendas@artralos.com.br