Skip to content
Request a quote

Products / Pool

Tile-Insert Access Cover with Flange

Takes the floor and has a gutter for the water.

Aluminum · made to measure

About the product

Hidden aluminum pump house cover with a flange. It takes the floor and has a gutter, a drain outlet and a discreet handle on the edge.

Tampa Casa de Máquina Oculta com Aba Bege instalado no ambiente
  • Takes the floor13 mm recess for the floor finish, bonded with PU 40.
  • Holds 300 kgOnce covered. Not suitable for vehicle traffic.
  • 9 cm gutterCollects the water, lets the air circulate and has a 50 mm outlet.
  • Stays open by itselfArms on the smaller ones; two pistons and two handles on the larger ones.

The Art Ralos hidden cover with flange gives access to the pump house while the floor around it keeps a continuous finish. Also suitable for areas near the pool, it takes a floor finish on its surface and leaves the frame flush with the finished floor.

The piece is made of 2 mm aluminum, powder coated in black, gray, brown or beige. The 13 mm recess takes the floor chosen for the area. With the floor laid, the cover blends into its surroundings, while the hidden handle keeps the access ready when you need to open the compartment.

Under the cover, a 9 cm gutter collects the water and lets air flow. The 50 mm vertical outlet must be connected to the drainage on site. This connection is part of planning the installation and leads the water collected by the gutter to the drainage system.

The opening is hinged and has stays to hold the lid open. Smaller versions use two arms; larger ones have two pistons and two handles. The equipment is reachable without removing the whole cover, and the stays help while it is open.

To install, rest the flange on the subfloor and set the frame to the level of the finish. The floor finish is glued to the cover with PU 40. Once finished, the piece bears up to 300 kg, but it is not meant for vehicle traffic. Keep this limit in mind when choosing the spot, and leave room to move the cover and reach the pump house.

Gallery

Tile-Insert Access Cover with Flange

Tile-Insert Access Cover with Flange in the room

1 of 11
Tile-Insert Access Cover with Flange in the room
Tile-Insert Access Cover with Flange in the room

1 of 11

Configure your product

Opening
Request a quote

Technical measurements

Tile-Insert Access Cover with Flange, from 50 x 50 to 120 x 120 cm.

CoverL = 500 a 1200L + 506790
L = 500 a 1200L + 506790
Front view in section, with sizes in millimeters.
  • 50 to 120 cmCover size, or made to measure
  • L + 50 mmWidth with the flanges
  • L − 36 mmArea that takes the floor
  • 13 mmRecess that takes the floor
  • L − 140 mmClear opening
  • 70 mmDrainage channel, on each side
  • 90 mmTotal height
  • 50 mmOutlet diameter of the channel
  • 2 mm aluminiumBlack, grey, brown or beige powder coating

The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.

Download the files

Fill in once and download every file of the Tile-Insert Access Cover with Flange.

You are

We use your details only to talk about your project.

Technical sheet

Send the size of the opening with the quote request. The sizes below are the most requested.

  • AluminumMaterial
  • Made to measureMade to the size of the opening

Reference sizes

50x50 to 120x120 cm, in 10 cm steps

Where to use

  • Pool pump house
  • Floor next to the deck

Areas

Request a quote

Send the size of the opening or the project. We answer with material, lead time and terms.

Request on WhatsApp

Or write to vendas@artralos.com.br