Skip to content
Request a quote

Products / Pool

Tile-Insert Access Cover with Grate

Floor in the center and a vented edge.

Aluminum · made to measure

About the product

Hidden aluminum pump house cover with a grate, a center that takes the floor, a vented edge and a gutter for rainwater.

Tampa Casa de Máquina Oculta com Grelha Bege instalado no ambiente
  • Vented edgeThe 5 cm perforated edge lets the air in and out.
  • Floor in the center13 mm recess takes the surrounding floor finish.
  • 9 cm gutterCollects rainwater and takes it to the 50 mm outlet.
  • Four colorsGray, black, brown or beige on the visible parts.

The Art Ralos hidden cover with grate combines a floor finish with airflow at the pump house access. Meant for outdoor areas, including near the pool, it keeps the center panel covered with floor and leaves a perforated edge on view around it.

Made of 2 mm aluminum, the piece has a 13 mm recess to take the floor finish. The center can match the surrounding floor, while the 5 cm edge has perforations that let air in and out. The grate is part of the cover itself and moves with it when opened.

The gutter under the edge collects the water and leads it to a 50 mm outlet. At 9 cm deep, it needs drainage planned on site. The design brings together access to the compartment, airflow and a path for the water in a single set.

The cover is hinged and has a discreet handle. In larger versions, pistons and twin handles help open it and reach the equipment. When choosing the spot, consider the space needed to lift the lid and reach the pump house, keeping the perforated edge clear for airflow.

On installation, the frame flange sits under the floor, with the set flush with the finished floor. The center panel takes the finish, and the gutter outlet must be connected to the drainage. Colors are gray, black, brown and beige, to match the visible parts to the outdoor finish.

Gallery

Tile-Insert Access Cover with Grate

Tile-Insert Access Cover with Grate in the room

1 of 10
Tile-Insert Access Cover with Grate in the room
Tile-Insert Access Cover with Grate in the room

1 of 10

Configure your product

Opening
Request a quote

Technical measurements

Tile-Insert Access Cover with Grate, from 50 x 50 to 120 x 120 cm.

CoverL = 500 a 1200L + 506790
L = 500 a 1200L + 506790
Front view in section, with sizes in millimeters.
  • 50 to 120 cmCover size, or made to measure
  • L + 50 mmWidth with the flanges
  • L − 140 mmPanel that takes the floor
  • 50 mmWidth of the grate border
  • 13 mmRecess that takes the floor
  • L − 140 mmClear opening
  • 70 mmDrainage channel, on each side
  • 90 mmTotal height
  • 50 mmOutlet diameter of the channel
  • 2 mm aluminiumGrey, black, brown or beige powder coating

The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.

Download the files

Fill in once and download every file of the Tile-Insert Access Cover with Grate.

You are

We use your details only to talk about your project.

Technical sheet

Send the size of the opening with the quote request. The sizes below are the most requested.

  • AluminumMaterial
  • Made to measureMade to the size of the opening

Reference sizes

50x50 to 120x120 cm, in 10 cm steps

Where to use

  • Pool pump house
  • Floor next to the deck

Areas

Request a quote

Send the size of the opening or the project. We answer with material, lead time and terms.

Request on WhatsApp

Or write to vendas@artralos.com.br