Skip to content
Request a quote

Products / Pool

Access Cover with Electrical Panel

Electrical panel on the underside.

Aluminum · made to measure

About the product

Aluminum pump house cover with an electrical panel, piston-assisted opening and the panel on its underside.

Tampa Casa de Máquina com Painel Elétrico Bege Aberta instalado no ambiente
  • Panel under the coverPSAI box with a clear door, breakers and timer.
  • IP68 protectionThe box reaches IP68 protection once installed.
  • Two pistonsThey help open and close the hinged cover.
  • Takes the floor2 mm aluminum with the surrounding finish, level.

The pump house cover with electrical panel combines access to the equipment with a panel fixed to the underside of the opening. The set is meant for pump houses, including on the pool deck or in service corridors, where the controls must sit by the technical access.

The hinged cover is made of 2 mm aluminum and takes a floor finish on top. With the same finish as the surrounding floor, it can be installed level with the surface. Two pistons help it open and close.

The panel box is made of HIPS and has a clear door, circuit breakers and a timer. It is fixed under the cover, so the components are reachable when it opens. Once installed, the box is rated IP68. The padlock is not included.

In the pool pump house, the position of the panel puts the controls within reach at the opening, while the opening gives access to the equipment below the floor. The set also suits technical rooms in residential, commercial and industrial projects.

The cover has a gutter with a 50 mm vertical drain outlet. When planning the build, consider the route of this outlet and of the panel conduits, as well as the position of the floor finish and the opening. The installation must be done by a qualified professional, matching the electrical connections and the drainage.

The floor finish is fixed to the cover with silicone or PU. Check the alignment with the floor before finishing. This model is not meant for vehicle traffic. Art Ralos offers finishes in beige, gray, brown and black to suit the project.

Gallery

Access Cover with Electrical Panel

Access Cover with Electrical Panel in the room

1 of 11
Access Cover with Electrical Panel in the room
Access Cover with Electrical Panel in the room

1 of 11

Configure your product

Opening
Request a quote

Technical measurements

Access Cover with Electrical Panel, from 80 x 80 to 120 x 120 cm.

CoverL = 800 a 1200L + 506790
L = 800 a 1200L + 506790
Front view in section, with sizes in millimeters.
  • 80 to 120 cmCover size, or made to measure
  • L + 50 mmWidth with the flanges
  • L − 36 mmArea that takes the floor
  • 13 mmRecess that takes the floor
  • L − 140 mmClear opening
  • 70 mmDrainage channel, on each side
  • 90 mmTotal height
  • 50 mmOutlet diameter of the channel
  • 2 mm aluminiumBlack, grey, brown or beige powder coating

The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.

Download the files

Fill in once and download every file of the Access Cover with Electrical Panel.

You are

We use your details only to talk about your project.

Technical sheet

Send the size of the opening with the quote request. The sizes below are the most requested.

  • AluminumMaterial
  • Made to measureMade to the size of the opening

Reference sizes

80x80 to 120x120 cm, in 10 cm steps

Where to use

  • Pool pump house
  • Pool deck or service corridor

Areas

Request a quote

Send the size of the opening or the project. We answer with material, lead time and terms.

Request on WhatsApp

Or write to vendas@artralos.com.br