Skip to content
Request a quote

Products / Pool

Non-Slip Access Cover

Aluminum checker plate with a hidden handle.

Aluminum · made to measure

About the product

Non-slip pump house cover in aluminum checker plate, with a hidden handle, ventilation and a gutter that leads water to the drain.

Tampa Casa de Máquina Antiderrapante instalado no ambiente
  • Checker plate reliefHelps the grip when stepping on a wet floor.
  • Hidden handle and lockPiston and double handle on the larger covers.
  • VentilationThe cover vents the compartment.
  • 9 cm gutterTakes the water to the 50 mm outlet.

The non-slip pump house cover closes the access to the pool equipment with a raised checker surface. It is an option for outdoor areas and places near the pool where people walk and there is water.

The piece is made of 2 mm aluminum plate with a matte black finish. The non-slip pattern helps grip when walking on a wet surface. The plate stays on view and does not take a floor on top, so the aluminum finish itself makes the access.

The opening is hinged, with a hidden handle and a locking system. Larger covers include a piston and a twin handle. These features make it easier to reach the compartment when you need to check or service the pool equipment.

Around the opening, a 9 cm gutter leads the water to a 50 mm outlet. The cover is also vented. So the collected water has somewhere to go, the outlet must be connected to the drainage planned on site. The ventilation of the compartment must also be considered when planning the installation.

The frame must be set in concrete in the floor, with the flange under the floor finish and the cover level with the surrounding floor. The checker finish stays visible after installation, with no porcelain tile or other floor on the piece.

The model can be used for pump house access in residential pool areas or shared spaces. The raised surface, the hidden handle and the hinged opening bring together what is needed to close the access and open it again for maintenance.

Gallery

Non-Slip Access Cover

Non-Slip Access Cover in the room

1 of 11
Non-Slip Access Cover in the room
Non-Slip Access Cover in the room

1 of 11

Configure your product

Opening
Request a quote

Technical measurements

Non-Slip Access Cover, from 50 x 50 to 120 x 120 cm.

CoverL = 500 a 1200L + 506790
L = 500 a 1200L + 506790
Front view in section, with sizes in millimeters.
  • 50 to 120 cmCover size, or made to measure
  • L + 50 mmWidth with the flanges
  • L − 140 mmClear opening
  • 70 mmDrainage channel, on each side
  • 90 mmTotal height
  • 50 mmOutlet diameter of the channel
  • 2 mm aluminiumExposed non-slip checker plate

The sheet has the top view, the front view and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.

Download the files

Fill in once and download every file of the Non-Slip Access Cover.

You are

We use your details only to talk about your project.

Technical sheet

Send the size of the opening with the quote request. The sizes below are the most requested.

  • AluminumMaterial
  • Made to measureMade to the size of the opening

Reference sizes

50x50 to 120x120 cm, in 10 cm steps

Where to use

  • Pool pump house
  • Floor next to the deck

Areas

Request a quote

Send the size of the opening or the project. We answer with material, lead time and terms.

Request on WhatsApp

Or write to vendas@artralos.com.br