

Tile-Insert Linear Drain
The finish takes the same floor as the shower. Only the gap shows.
Products / Kitchen and industry
304 stainless for kitchens, with a straight or diagonal grate.
made to measure
Brushed stainless industrial kitchen drain, with a frame and a removable grate. Comes with a straight or diagonal pattern and an optional floor trap.

The industrial kitchen drain takes the water through the grate and leads it to a channel installed in the floor. Meant for professional kitchens and prep areas, it combines a channel, a frame and a removable grate in a set with a matte brushed stainless finish.
The water passes through the slots in the surface and reaches the channel below. The grate can be lifted to reach this part of the set, useful when you need to inspect the inside. Then it rests on the frame again, finishing the drain point.
There are two grate patterns. The straight version has two rows of slots and a center rib. In the diagonal version, the slots are angled and set in one row. Both have openings for the water and leave the metal finish on view on the floor.
The product is also available with or without a floor trap. The choice depends on the planned installation. Consider this difference when defining the drain point and the setup the kitchen or prep area needs.
On installation, the frame and the grate sit flush with the floor. The channel stays under the grate, which must remain reachable so it can be lifted when the inside needs checking. The position of the drain and its connection must be considered when planning the professional area.
The matte brushed finish keeps the stainless look visible across the set. To choose the version, weigh the grate pattern and whether you need the floor trap against the installation conditions. The removable grate makes it easy to reach the channel without moving the frame in the floor.
Commercial Kitchen Drain in the room
Commercial Kitchen Drain, 10 cm width.
The sheet has the top view, the front view in section and the dimensions of the drawing. Sizes may vary from 1 mm to 3 mm because production is manual.
Send the size of the opening with the quote request. The sizes below are the most requested.
100x10 cm · 100x15 cm · 100x20 cm


The finish takes the same floor as the shower. Only the gap shows.


Stainless grate with five laser-cut patterns, also in black.


A plain strip of stainless or matte black on the shower floor.


Ralo Linear Basic in matte light gray painted aluminum, for use inside shower enclosures. A 7 cm tray receives the same flooring.
Send the size of the opening or the project. We answer with material, lead time and terms.
Request on WhatsAppOr write to vendas@artralos.com.br