

Strong Stainless Trench Grate
304 stainless for garages and ramps.
Matte black carbon steel for car traffic.
made to measure
Strong garage grate in carbon steel with a matte black finish. For masonry channels where vehicles pass.

The Strong garage grate covers channels where vehicles pass. Made of carbon steel with a matte black powder coat, it is meant for masonry channels, flush with the floor.
Its surface is made of flat cross bars set close together and joined by rods. The gaps between the bars let the water into the channel. The structure was developed for places with high loads, such as vehicle traffic.
The model can be used in garages and ramps, as well as other access areas with vehicle traffic. The matte black finish leaves the grate visible on the floor and follows the channel along the drainage route.
For installation, the channel must be built in masonry and prepared to take the piece at floor level. When the channel runs a longer distance, the grates can be laid in sequence, forming a continuous line.
When choosing the spot, consider both the water path and the traffic expected in the area. The grate is meant for vehicle traffic, and the conditions of use and the support given by the channel must be considered in the project.
Cleaning and maintaining the channel are part of caring for the area. Removing the debris that builds up in the openings and in the channel keeps the water path clear. The powder-coated finish and the layout of the bars make a steel cover for the garage access.
Strong Garage Trench Grate in the room
Strong Garage Trench Grate, 10 cm width.
The sheet has the front view, in section, and the dimensions of the drawings. Sizes may vary from 1 mm to 3 mm because production is manual.
Send the size of the opening with the quote request. The sizes below are the most requested.
100x6 cm · 100x10 cm · 100x15 cm · 100x20 cm


304 stainless for garages and ramps.


Aluminum with laser-cut holes, can take stones.


The finish takes the same floor as the shower. Only the gap shows.


Stainless grate with five laser-cut patterns, also in black.
Send the size of the opening or the project. We answer with material, lead time and terms.
Request on WhatsAppOr write to vendas@artralos.com.br